Insights · Insight

How Do You Turn Building Data into a Ranked Action List?

Most buildings don’t lack data. They lack an order to act in.

Focus: Prioritizing building findingsAudience: Owners · Property Managers · Facility TeamsPublished: November 16, 2026Published by: Airiva Inc.

Introduction

245 Alarms a Month

In 2022, researchers from Lawrence Berkeley National Laboratory, Pacific Northwest National Laboratory and the University of Nebraska-Lincoln shared what they had learned from analyzing 18 million rows of fault data from commercial buildings. One number stands out: the median building in their data logged 245 heating, ventilation and air conditioning fault reports a month. That isn’t 245 separate problems. The count goes up by one for each day a fault is flagged on a piece of equipment, so a single stuck valve can add thirty reports in a month on its own. But that’s exactly the point. Raw fault data is loud, repetitive and hard to act on.

No facility team can work through 245 reports a month and figure out which ones matter. And that’s just the HVAC equipment, before anyone looks at energy bills, indoor air readings, tenant complaints or certification requirements.

So the problem in most buildings today isn’t a lack of data. It’s the lack of an order to act in. A dashboard full of red dots feels like insight, but until someone decides what to do first, second and third, it’s just a longer to-do list.

Section 01

Think Like an Emergency Room

A busy emergency room doesn’t treat patients in the order they arrive. A triage nurse looks at each one quickly, asks a few standard questions, and sorts them. The person with chest pain goes ahead of the sprained ankle, even if the ankle arrived first.

Building data needs the same thing. Every alarm, fault, high reading and complaint is a patient in the waiting room. Some are urgent. Some can wait a month. Some aren’t really sick at all, because the problem is the thermometer, not the patient. Without triage, the team ends up chasing whatever is loudest or newest, which is rarely what matters most.

A long list of problems isn’t insight. A short list in the right order is.

Section 02

Three Questions for Every Finding

In our view, every finding can be sorted with three plain questions. They don’t need software to answer, just honest judgment and a little data.

Three questions to sort every finding Ask them in this order
Question 1
What does it cost to leave it?

Energy dollars, but also comfort complaints, health risk for occupants, and any code or certification exposure. Some of the biggest costs don’t show up on the utility bill.

Question 2
What does it cost to fix?

Staff time, parts, contractor visits and disruption to tenants. A schedule change is free. A new chiller is not.

Question 3
How sure are we?

Has someone confirmed the problem, or is it only a reading? If a sensor could be wrong, checking it comes before fixing anything else.

The first two questions are the familiar cost and benefit. The third is the one most lists skip, and it changes the order more than people expect. A finding that looks expensive but rests on one doubtful sensor reading should become a quick check, not a project.

Section 03

Group Before You Rank

Before ranking anything, it pays to group findings that share a cause. One failing sensor can set off dozens of alarms in the equipment that depends on it. One wrong schedule can show up as high energy use, a stuffy morning and a humidity alarm, all on the same day. Ranking those as separate problems makes the list longer and hides the real fix.

Sensors are usually the first group to check. In a 2023 study of more than 60,000 pieces of HVAC equipment, the Berkeley Lab team found faulty zone temperature sensors on 46 percent of the units serving individual zones at some point, and concluded that their results emphasize the importance of scheduled sensor calibration. If the readings are wrong, every decision built on them is wrong too, including the ranked list itself.

Section 04

What a Ranked List Looks Like

Here is a simple example of how a handful of findings might sort out once the three questions are answered. The findings are typical, not from a real building.

Finding Cost to leave Cost to fix How sure Action
Air handler running nights and weekends High Low Confirmed in trend data Fix this week
Meeting room CO₂ high every afternoon Medium (comfort and health) Low to medium Sensor not yet checked Check sensor, then adjust ventilation
Heating valve leaking through Medium Medium Confirmed on site Schedule repair this quarter
Boiler near end of life High over time High Confirmed by condition report Plan as a capital project, after tuning

Notice that the most expensive item isn’t first. Low-cost, confirmed fixes go to the top because they pay back fastest and often change what the bigger projects need to be. A boiler sized after the schedules are fixed may be smaller than one sized before.

The evidence supports starting this way. A 2020 Berkeley Lab review of about 1,500 North American buildings found a median payback of 1.7 years for existing building commissioning, which is mostly this kind of operational fix. And in the U.S. Department of Energy’s Smart Energy Analytics Campaign, participants using fault detection software reported median energy savings of 9 percent a year.

245 Median HVAC fault reports per building per month, counted one per fault per day
1.7 yrs Median payback for existing building commissioning across about 1,500 buildings
9% Median yearly energy savings for organizations using fault detection software
What This Changes

Short, Owned and Dated

A useful action list has three features. It is short, usually no more than ten items at a time. Every item has a named owner. And every item has a date, both for when it gets done and for when someone checks that it worked.

That last step is the one most often skipped. After a fix, look at the same data that flagged the problem. Did the air handler actually stop at night? Did the CO₂ come down? For the building as a whole, a benchmark helps. In Canada, the free ENERGY STAR Portfolio Manager tool, supported by Natural Resources Canada, gives many building types a score from 1 to 100 against similar buildings across the country, where 50 is the median. Tracking it over time shows whether the list is moving the building, not just the paperwork.

At Airiva we read every building through five lenses: environment, energy, automation, compliance and insight. The fifth lens exists for exactly this reason. Findings from the other four only become useful once they are put in one list, in one order, with someone responsible for each.

Conclusion

A Short List Beats a Long Dashboard

More sensors and more software will keep producing more data. That’s mostly a good thing. But data only helps a building when it turns into a decision, and decisions need an order.

Ask what each problem costs to leave, what it costs to fix, and how sure you are. Group the ones that share a cause. Put the cheap, confirmed fixes first. Then check that they worked. It isn’t complicated, but it’s the step most buildings are missing.

About Airiva Airiva is an Alberta-based building intelligence advisory firm. We read every building through five lenses (environment, energy, automation, compliance, and insight) and show owners where to act first. From signal to action.
Building Data Prioritization Fault Detection Benchmarking ENERGY STAR Airiva

Published by Airiva Inc., an Alberta-based building intelligence advisory firm. No equipment brands, software products or service providers are recommended, and no endorsement is intended. ENERGY STAR is a registered trademark administered in Canada by Natural Resources Canada. The ranked list in Section 04 is an illustration, not data from a real building.

Sources read: Crowe, Chen, Granderson, Reeve, Troup, Yuill and Chen, “What We Learned From Analyzing 18 Million Rows of Commercial Buildings’ HVAC Fault Data,” ACEEE Summer Study presentation, 2022 (median of 245 fault reports per building per month, counted as daily fault records); Crowe et al., “Empirical Analysis of the Prevalence of HVAC Faults in Commercial Buildings,” Science and Technology for the Built Environment 29, 2023 (zone temperature sensor faults and sensor calibration finding); Crowe et al., “Building Commissioning Costs and Savings Across Three Decades and 1,500 North American Buildings,” Energy and Buildings 227, 2020 (1.7-year median payback); Lawrence Berkeley National Laboratory, “Berkeley Lab Building Efficiency Campaign Drives $95M in Annual Energy Savings,” October 2020 (final Smart Energy Analytics Campaign results, 9 percent median savings with fault detection); Natural Resources Canada, “ENERGY STAR Score for Offices in Canada,” technical reference, page updated December 2025 (1 to 100 percentile score, 50 as median).

← Back to Insights